What to do if Deye Inverter shows FAN_IN_Warn?
If your Deye Inverter displays a FAN_IN_Warn, check the operating status of the fan. If the fan is running abnormally, open the cover of the inverter to check the fan's connection.
What to do if my Deye SUN-5K-SG01HP3-EU-AM2 displays AC_NoUtility_Fault?
If your Deye Inverter displays an AC_NoUtility_Fault, check the grid voltage and frequency to ensure the connection of the power grid is normal.
What to do if Deye Inverter shows CT_Notconnect_warn?
If your Deye Inverter displays a CT_Notconnect_warn, check whether the wires of CTs are connected correctly.
What to do if Deye SUN-5K-SG01HP3-EU-AM2 Inverter shows CT_WRONG_direction_warn?
If your Deye Inverter displays a CT_WRONG_direction_warn, check whether the arrow on the CT's case points to the inverter and verify if the installation location of CTs is correct.
What to do if Deye SUN-5K-SG01HP3-EU-AM2 Inverter displays Parallel_comm_warn?
If your Deye Inverter displays a Parallel_comm_warn due to unstable parallel communication, check the connection of the parallel communication line. Ensure that the parallel communication line is not wound with other cables, and check whether the parallel dip switch is on.
What does it mean if my Deye SUN-5K-SG01HP3-EU-AM2 shows DC_VoltLow_Fault?
If your Deye Inverter displays a DC_VoltLow_Fault, it means the BUS voltage is too low. Verify if the battery voltage is too low. If it is, use PV or the grid to charge the battery.
What does it mean if my Deye Inverter shows DC_VoltHigh_Fault?
If your Deye Inverter displays a DC_VoltHigh_Fault, it means the BUS voltage is too high. Check if the battery voltage is too high and verify that the PV input voltage is within the allowed range.
How to fix GFCI_Failure on Deye SUN-5K-SG01HP3-EU-AM2?
If your Deye Inverter displays a GFCI_Failure due to a leakage current fault, check the PV side cable ground connection. You can also try restarting the system a few times.
What to do if Deye SUN-5K-SG01HP3-EU-AM2 displays Battery_comm_warn?
If your Deye Inverter displays a Battery_comm_warn, it means there is abnormal battery communication. Check whether the BMS connection is stable and if the BMS data is abnormal.
What should I check if my Deye SUN-5K-SG01HP3-EU-AM2 Inverter displays AC_UnderFreq_Fault?
If your Deye Inverter displays an AC_UnderFreq_Fault, it means the grid frequency is out of range. Check whether the frequency is in the range of the specification. Also, check whether AC cables are firmly and correctly connected.
General| Model | SUN-5K-SG01HP3-EU-AM2 |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 5000 W |
| Max. DC Input Power | 6500 W |
| Max. DC Input Voltage | 500V |
| Max Efficiency | 97.6% |
| MPPT Efficiency | 99.9% |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 13A |
| Nominal AC Output Power | 5000 W |
| Max. AC Output Power | 5500 W |
| AC Voltage Range | 180-280V |
| THDI | <3% |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 120 A |
| Max. Discharging Current | 120 A |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Operating Temperature Range | -25°C to 60°C |
| Cooling Method | Natural Convection |
| Weight | 25 kg |
| Nominal AC Voltage | 230V |
| Power Factor | 0.8 leading to 0.8 lagging |
| AC Grid Frequency Range | 50/60Hz |
| Communication | RS485 |
To Next Page
