What should I check if my Deye SUN-5K-SG01HP3-EU-AM2 Inverter displays AC_OverFreq_Fault?
If your Deye Inverter displays an AC_OverFreq_Fault, it means the grid frequency is out of range. Check whether the frequency is within the specification range. Also, check that the AC cables are firmly and correctly connected.
What should I check if my Deye Inverter displays AC_UV_UnderVolt_Fault?
If your Deye Inverter displays an AC_UV_UnderVolt_Fault, it indicates that the grid voltage is out of range. Check if the voltage is within the specified range. Also, ensure that AC cables are firmly and correctly connected.
What should I check if my Deye SUN-5K-SG01HP3-EU-AM2 displays AC_UV_OverVolt_Fault?
If your Deye Inverter displays an AC_UV_OverVolt_Fault, it indicates that the grid voltage is out of range. Check if the voltage is within the specified range. Also, ensure that AC cables are firmly and correctly connected.
What does it mean if my Deye Inverter shows DC_Insulation_Fault?
If your Deye Inverter shows a DC_Insulation_Fault, it means the PV isolation resistance is too low. You should check if the connection of PV panels and the inverter is firm and correct. Also, verify whether the PE cable of the inverter is connected to ground.
What to do if Deye Inverter shows Meter_offline_warn?
If your Deye Inverter displays a Meter_offline_warn, it indicates a meter communication failure. Check whether the meter has successful communication and whether the wiring is normal.
What does Tz_AC_OverCurr_Fault mean on my Deye SUN-5K-SG01HP3-EU-AM2 Inverter?
General| Model | SUN-5K-SG01HP3-EU-AM2 |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 5000 W |
| Max. DC Input Power | 6500 W |
| Max. DC Input Voltage | 500V |
| Max Efficiency | 97.6% |
| MPPT Efficiency | 99.9% |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 13A |
| Nominal AC Output Power | 5000 W |
| Max. AC Output Power | 5500 W |
| AC Voltage Range | 180-280V |
| THDI | <3% |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 120 A |
| Max. Discharging Current | 120 A |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Operating Temperature Range | -25°C to 60°C |
| Cooling Method | Natural Convection |
| Weight | 25 kg |
| Nominal AC Voltage | 230V |
| Power Factor | 0.8 leading to 0.8 lagging |
| AC Grid Frequency Range | 50/60Hz |
| Communication | RS485 |
To Next Page
