DFI LanParty nF4 - Specifications

Introduction
1
8
Chapter 1 - Introduction
Specifications
Processor
• AMD Athlon
TM
64 FX / Athlon
TM
64 / Sempron
TM
• Socket 939
Front Side Bus
• 2000MT/s HyperTransport interface
Chipset
• NVIDIA nForce4
TM
SLI (for “nF4 SLI” models only)
- Supports NVIDIA SLI
TM
(Scalable Link Interface)
• NVIDIA nForce4
TM
Ultra (for “nF4 Ultra” models only)
• NVIDIA nForce4
TM
(for “nF4” model only)
System Memory
• Four 184-pin DDR SDRAM DIMM sockets
• Supports dual channel (128-bit wide) memory interface
• Supports up to 4GB system memory
• Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200
(DDR400) DDR SDRAM DIMM
• Supports x8/x16 non-ECC unbuffered DIMMs, up to 512Mb
DDR devices
Expansion Slots
• 2 PCI Express x16 slots
• 1 PCI Express x1 slot
• 1 PCI Express x4 slot
• 2 PCI slots
SLI Mode / Single VGA Mode (for “nF4 SLI” models only)
• SLI mode
- 2 SLI-ready graphics cards (use identical cards) on the PCI
Express x16 slots.
- The graphics cards are connected via the SLI bridge.
- The bandwidth of each slot is x8; when the graphics cards
are connected via the SLI bridge, it runs at x16 bandwidth.
• Single VGA mode
- 1 PCI Express graphics card on the PCIE1 slot will run at
x16 bandwidth.