DFRobot OverLord 3D - Chapter 3: Printer Maintenance

OverLord 3D Printer User Manual
38
Chapter 3 Maintenance
Brief:
3.1 Clean your nozzle
3.2 Clean the broken filament inside extruder
3.3 Clean the broken filament inside filament tube
3.4 Fastening the belt
3.5 How to paint the glue before printing (Only for OverLord Pro)
3.6 How to use the special printing tape (Only for OverLord)
3.7 Maintenance of OverLord’s Parts