DFRobot OverLord 3D - Material Loading and Unloading

OverLord 3D Printer User Manual
30
(7) When the temperatures
of nozzle and buildplate
are back to room
temperature, carefully use
a scraper to remove the
print object.
CAUTION: Do not let the
scraper blade towards
yourself and other people,
and use it carefully to
prevent injury.
2.7 Auto-remove/feed printing material
CAUTION：Auto-remove/feed material generates high temperature in 3D printer nozzle
module. Please do not let any part of your body reaching inside the printer to prevent
injury.
If you want to change or remove printing material, press “↑” and “↓” on the main menu
and select “Material”.