EasyManua.ls Logo

DG GRYPHON S3 - Hardware Specifications; External Hardware Features; OFF; on Power Switch

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GRYPHON
®
- S3 MANUAL
© 2006
8
2.1.3 Hardware specifications
Dimensional Height = 2 in., width = 5
1
/
4
in., depth = 4 in.
Environmental Storage temperature: -40 to 80 degrees C
Operational temperature: -10 to 80 degrees C
Electrical Maximum supply current: 500 mA (power input fused at 1A)
Input voltage Operating voltage range: 6 to 32 VDC (with reverse voltage protection)
Nominal voltage: 14.5 VDC
2.1.4 External hardware features
The following figure shows the external features of the S3.
(if installed)
Figure 4: Gryphon – S3 rear panel
2.1.4.1 OFF / ON power switch
Once a power source is applied to the DLC connector (or to either the power jack connector, or one
of the module connectors), this switch may be used to turn the Gryphon – S3 unit on and off. This
switch has the following three functions.
Multi
p
le module
Serial Connector Power Connector
Power Module
connector
Ethernet connector
Status
I/O connector

Table of Contents