Need help?Do you have a question about the DG GRYPHON S3 and is the answer not in the manual?
General| Brand | DG |
|---|---|
| Model | GRYPHON S3 |
| Category | Test Equipment |
| Language | English |
Provides contact information and hours for technical assistance with the Gryphon hardware.
Describes the necessary steps for setting up the Gryphon S3 hardware for operation.
Details the different methods and precautions for powering the Gryphon S3 unit.
Explains the requirement for an Ethernet connection and network card for PC communication.
Outlines the two methods for configuring the hardware's TCP/IP Ethernet parameters.
Step-by-step guide to accessing and modifying TCP/IP settings via the Gryphon's web interface.
Details configuring wireless settings like SSID, WLAN Mode, and WEP through the web interface.
Guide to accessing web-based utilities for managing Gryphon TCP/IP parameters.
Step-by-step guide to connecting the Gryphon via a null serial cable and terminal emulator.
Details the default mode where the Gryphon acts as a DHCP server for the connected PC.
Explains the mode where the Gryphon obtains an IP address from an external DHCP server.
Describes the mode where both Gryphon and PC use static IP addresses.
Provides instructions for configuring PC network settings for DHCP or Static IP modes.
Step-by-step guide to configuring PC network settings in Windows 98/ME.
Step-by-step guide to configuring PC network settings in Windows 2000/XP.
Instructions on how to verify the Gryphon setup by pinging the device.
To Next Page