PPC3™ OPERATION AND MAINTENANCE MANUAL
© 2002-2007 DH Instruments, a Fluke Company Page 134
5.7 RELOADING EMBEDDED SOFTWARE INTO FLASH
MEMORY
PPC3 uses FLASH memory. This allows the embedded software that controls PPC3 operations and functions to be
loaded into PPC3 over its COM1 port from a computer with a simple FLASH loading utility program.
To replace corrupted software or upgrade your software, access the DHI worldwide web site at
www.dhinstruments.com and go to SOFTWARE located under SUPPORT. A FLASH loading utility
and the latest PPC3 software are available for download at no charge. If you do not have access to the
web or have difficulty downloading or loading software, contact your DHI representative or a DHI
Authorized Service Provider for assistance.
If you believe you have discovered an error or “bug” in PPC3 software, please report it with complete
details by email to cal.repair@dhinstruments.com or submit an on-line Quality Feedback Report at
www.dhinstruments.com.
The DHI flash software loading utility and PPC3 embedded software are available for download from
DHI web site, www.dhinstruments.com.
To Next Page
Loading...