128
Chapter 6 Command Definitions
6.14.5 STC7P – Status C7 Link Print
Synopsis
This command requests a status report of the SS7 signaling links or SS7 link sets.
L2 STATUS - Possible values are:
• In service
• Out of service
• Proc outage
• Aligned rdy
• Init align
• Align not rdy
L3 STATUS - Possible values are:
• Available
• Unavailable
• Congested
• Deactivated (the link has been deactivated)
• Blocked (the link is blocked)
L3 BLOCKING STATUS - Possible values are:
• INHR - The link is remotely inhibited
• INHL - The link is locally inhibited
• BLKR - The link is remotely blocked
• COIP - Changeover is in progress
• CBIP - Changeback is in progress
• LIIP - Local link inhibiting is in progress
• LUIP- Local link uninhibiting is in progress
Syntax
STC7P:[PAGE=…][C7LINK=…];
STC7P:[PAGE=…][LS=…];
Prerequisites
None
Attributes
None
Examples
STC7P;
Output Format
CCS SS7 Signalling Link Status (Page 1 of 2)
C7LINK LS EQU TS SNLINK L2 STATUS L3 STATUS
1 1 1-3 1-3-16 BLOCKED
2 1 1-4 1-4-16 IN SERVICE AVAILABLE
3 2 3-3 3-3-16 INITIAL ALIGN UNAVAILABLE
4 2 3-4 3-4-16 OUT OF SERVICE DEACTIVATED
EXECUTED
To Next Page