Dialogic SS7G2X - IPEPS - Set Ethernet Port Speed; IPEPP - Display Ethernet Port Speed

77
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.7.1 IPEPS – Set Ethernet Port Speed
Synopsis
This command sets the Ethernet port speed.
Syntax
IPEPS:ETH=,SPEED=;
Prerequisites
None.
Attributes
None.
Examples
IPEPS:ETH=1,SPEED=100;
Output Format
IPEPS:eth=1,speed=100;
EXECUTED
6.7.2 IPEPP – Display Ethernet Port Speed
Synopsis
This command displays the Ethernet port speed. A speed displayed with an H indicates it is halfduplex,
otherwise it is full-duplex.
Syntax
IPEPP;
Prerequisites
None.
Attributes
None.
Examples
IPEPP;
Output Format
ETH SPEED
1 10H
2 100
3 AUTO
4 AUTO
EXECUTED