83
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.8.5 MMPTP – MML Port Print
Synopsis
This command gives a printout of the attributes of the serial port. Where the PORT parameter is omitted, the
printout is provided for all ports. The connected port executing this command is marked with a “*”.
Note: Only serial port 2 (COM2) is accessible by the user.
Syntax
MMPTP[:PORT=];
Prerequisites
None
Attributes
None
Examples
MMPTP:PORT=1;
MMPTP;
Output Format
Serial Port Configuration
PORT BAUD DBITS SBITS PARITY LINES PTMODE CONNECTED
1 9600 8 1 NONE 20 DTRDSR
2 1200 7 2 EVEN 8 NONE *
3 25 TELNET
4 25 TELNET
EXECUTED
To Next Page
Loading...