164
Chapter 12 Command Summary
• C7RTI - CCS SS7 Route Initiate
• C7RTC - CCS SS7 Route Change
• C7RTE - CCS SS7 Route End
• C7RTP - CCS SS7 Route Print
• C7SLI - CCS SS7 Signaling Link Initiate
• C7SLC - CCS SS7 Signaling Link Change
• C7SLE - CCS SS7 Signaling Link End
• C7SLP - CCS SS7 Signaling Link Print
IP Commands
• IPEPS - Set Ethernet Port Speed
• IPEPP - Display Ethernet Port Speed
• IPGWI - Internet Protocol Gateway Initiate
• IPGWE - Internet Protocol Gateway End
• IPGWP - Internet Protocol Gateway Print
MML Commands
• MMLOI - MML Log Off Initiate
• MMLOP - MML Log Off Print
• MMLOS - MML Log Off Set
• MMPTC - MML Port Change
• MMPTP - MML Port Print
Maintenance Commands
• MNBLI - Maintenance Blocking Initiate
• MNBLE - Maintenance Blocking End
• MNINI - Maintenance Inhibit Initiate
• MNINE - Maintenance Inhibit End
• MNRSI - Maintenance Restart System Initiate
Measurement Commands
• MSC7P - Measurements SS7 Print
• MSPCP - Measurements PCM Print
• MSSLP - Measurements SIGTRAN Link Print
• MSSYP - Measurements System Print
Remote Data Centre Commands
• RDCRI - Remote Data Centre Continuous Record Initiate
• RDCRC - Remote Data Centre Continuous Record Change
• RDCRE - Remote Data Centre Continuous Record End
• RDCRP - Remote Data Centre Continuous Record Print
• RDPDI - Remote Data Centre Periodic Data Initiate
• RDPDE - Remote Data Centre Periodic Data End
• RDPDP - Remote Data Centre Periodic Data Print
• RDPRI - Remote Data Centre Periodic Report Initiate
• RDPRC - Remote Data Centre Periodic Report Change
• RDPRE - Remote Data Centre Periodic Report End
To Next Page