EasyManua.ls Logo

Dialogic SS7G2X - Page 34

Dialogic SS7G2X
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Chapter 5 Parameter Definitions
PCMTYPE The type of PCM in use
One of:
•T1
•E1
PCR Preventive Cyclic Retransmission Y or N Default = N
PER Personality configuration 0 to 255 Default = 0
PERIOD
A period of time in the format:
xx:yy:zz
where:
xx = 2 digit hour
yy = 2 digit minute
zz = 2 digit second
xx – 00 to 23
yy – 00 to 59
(yy must be 00,
when xx is 23)
zz – 00 to 59
(zz must be 00,
when xx is 23)
PORT
V24 port identifier
NOTE: Port 1 is not physically accessible.
1 to 4
PPORT
The SCTP port associated with the peer on a
SIGTRAN link
1 to 65535
2905 for M3UA
SNLINKs
3565 for M2PA
SNLINKs
PRTYPE
The type of periodic report:
MSC7 – periodic reporting of traffic
measurements for CCS SS7 links.
MSPCM – periodic reporting of traffic
measurements for PCMs.
MSSL – periodic reporting of traffic
measurements for SIGTRAN links.
MSEP – periodic reporting of Ethernet
port measurements.
MSSY – periodic reporting of System
measurements.
One of:
•MSC7
•MSSL
MSPCM
•MSEP
•MSSY
PTMODE Mode for serial port
One of:
•NONE
•DTRDSR
•TELNET
Default =
•DTRDSR for
ports 1 and 2
•TELNET for
ports 3 and 4
RANGE CIC range 0 to 4095
RC
The routing context of a SIGTRAN link
within an Application Server
0 to 2147483647
RDC Remote Data Centre (RDC) identifier 1 to 4
RDC1
First choice RDC for a continuous record or
periodic report
1 to 4
RDC2
Second choice RDC for a continuous record
or periodic report.
Zero indicates no RDC is assigned.
0 to 4 Default = 0
RECORD
The identifier for a continuous data
collection record
1 to 6
REPORT
The identifier for a periodic data collection
report
1 to 5
RESET Performs a reset operation Y or N Default = N
Table 2. Parameter Definitions (Continued)
Name Description Range Notes

Table of Contents