Dialogic SS7G2X - Page 58

58
Chapter 6 Command Definitions
Prerequisites
• When changing the personality or activating/deactivating signaling protocols, all boards and groups
within the system must be blocked.
• A password, if provided, must be confirmed using the CONFIRM parameter to ensure that the password
has not been mistyped.
• The user cannot enter a PER parameter value that already exists in the system.
• The user cannot specify an IP address, subnet or gateway value that already exists in the system.
Attributes
CONFIG
Examples
CNSYS:SYSID=STATION1,PER=2,IPADDR=255.123.0.123;