Diamondview DV65UM - Page 21

21
Source 3
Select the third source
Options: DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, HDMI4, VGA, OPS
Note: This function is only available when Multi-Source Views is set to Quad View.
If HDMI4 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI4 cannot be selected.
Source 4
Select the fourth source
Options: DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, HDMI4, VGA, OPS
Note: This function is only available when Multi-Source Views is set to Quad View.
If HDMI4 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI4 cannot be selected.
PIP Size
Select the size of the PiP (Picture-in-Picture)
Options: Small, Mid, Large
Note: This function is only available when Multi-Source Views is set to PiP.
PIP Position
Set the position of the PiP (Picture-in-Picture)
Options: Top R (Top Right), Top L (Top Left), Bot R (Bottom Right), Bot L (Bottom
Left)
Note: This function is only available when Multi-Source Views is set to PiP.
Input Swap
Swap the Main Input source with Source 2
Note: This function is only available when Multi-Source Views is set to PiP or Dual
View.