500 Series
33
MENU
2 2
V4
∗
∗∗
∗
MENU
T/FT
∗
∗∗
∗
4.2. REMOVING VENDORS [ 2 2 ]
In order to remove a vendor, that is, free the memory occupied by
the said sales assistant, take the following steps:
1. Access vendors programming and select Remove Vendors
MENU (2 sec) 2 2.
2. Press the key associated to the sales assistant to be removed,
for example V4. If you do not register a new sales assistant, this
key will remain inactive and operations accumulated cleared to
zero.
3. Press
∗
∗∗
∗
to confirm the removal of this sales assistant.
4. Press MENU to return to working mode.
This operation is only possible if the parameter Remove
vendors is set at YES (TEST MODE) and if the memory you
wish to delete is not being used at that moment.
When registering or removing sales assistants, the +
++
+ and −
−−
−
keys go forward and backward respectively to the next or
previous sales assistant. Likewise C deletes the data of the
input line, except in training mode which removes the said sales
assistant from this operating mode.
4.2.1.Removing all vendors
You can disable all the sales assistant keys at the same time. To do
so:
1. Press T/FT (ALL).
2. Press
∗
∗∗
∗
to confirm the elimination of all the vendors.
To Next Page
Loading...
