Dibal 500 Series - Deleting Only Products; Deleting Active Products; Configuration Deletion

USER´S MANUAL
49-U500WMEN11
46
6.3.3.2 Deleting Only Products [ 9 3 3 2 ]
To carry out this operation:
1. Access to the menu pressing MENU during 2 seconds.
2. Press the 9 3 3 2. keys.
3. Press the∗
∗∗
∗ 3 times.
4. The scale gives 2 options: Press the ∗
∗∗
∗ key (YES), or Press
the X key (NO):
- Pressing the ∗
∗∗
∗ key (YES), it deletes the products
registered in traceability.
- Pressing the X key (NO), It cancels the deletion of the
products registered in traceability.
6.3.3.3 Deleting Active Animals [ 9 3 3 3 ]
When registering a product, the code is stored in the scale. It is
stored as an active product. This association remained even when
the scale is off until the active product is cleared.
To carry out this operation:
1. Access to the menu pressing MENU during 2 seconds.
2. Press the 9 3 3 3. keys.
3. Press the∗
∗∗
∗ 3 times.
4. The scale gives 2 options: Press the ∗
∗∗
∗ key (YES), or Press
the X key (NO):
- Pressing the ∗
∗∗
∗ key (YES), It deletes the active products.
- Pressing the X key (NO), it cancels the deletion of
active products.
6.3.4. Configuration Deletion [ 9 3 4 ]
To carry out this operation:
1. Access to the menu pressing MENU during 2 seconds.
2. Press the 9 3 4. keys.
3. Press the∗
∗∗
∗ 3 times.
4. The scale gives 2 options: Press the ∗
∗∗
∗ key (YES), or Press
the X key (NO):
- Pressing the ∗
∗∗
∗ key (YES), The configuration default
values are restored.
- Pressing the X key (NO), The configuration default
values restoration.is cancelled.