Dibal 500 Series - Sales Report by Article Code (Extended); Sales Report by PLU

USER´S MANUAL
49-U500WMEN11
36
5.1.4.Sales per Artcile by Code [ 8 1 4 ]
This list gives information about sold articles classified by code.
Pressing the X key, you can select the range of codes, the
department, the section or the VAT type. In this list does not appear
the article number operation. It includes the PLU’s codes with the
weight (or units) sold and the total amount. At the end of the list
appears the total of the different articles sold, the sum of weights
and amounts.
*** WEIGHED ARTICLES***
CODE – WEIGHT – AMOUNT
CODES
ADD WEIGHING
ADD AMOUNTS
*** UNWEIGHED ARTICLES ***
CODE – UNITS – AMOUNT
CODES
UNITS
ADD AMOUNTS
There are different types of levels
1 → level 1 (day’s sales)
2 → level 2 (weekly sales)
3 → level 3 (monthly sales)
In order to position ourselves in the level of accumulated, press
F1
until Level AC. There are three levels of accumulation, from 1 to 3.
To select the accumulated levels, press the key (
1
,
2
and
3
)
corresponding to the level selected (1, 2 & 3 respectively). For
further information on accumulated levels. By default, if there is not
selected any level, the list corresponding to level 1 will be printed.
5.1.5. Sales per Artcile by PLU [ 8 1 5 ]
This list shows the sales associated with each PLU, and includes
the PLU, the designation and the amount sold of each PLU. At the
end of this list the total of the different articles sold and the sum of
the amounts is shown.
PLU – DESIGNATION – AMOUNT
CODES
ADD AMOUNTS