Dibal 500 Series - Data Deletions; Z Deletion; Deleting Accumulated Levels

USER´S MANUAL
49-U500WMEN11
44
6. DELETIONS [ 9 ]
6.1. Z DELETION [ 9 1 ]
To carry out this operation:
1. Access to the list menu pressing MENU for 2 seconds.
2. Press the 9 1 keys.
3. Press the ∗
∗∗
∗ key 6 times.
4. The scale gives 2 options: Press the ∗
∗∗
∗ key (YES), or press the
X key (NO):
- Pressing the ∗
∗∗
∗ key (YES), a list of clearance to zero of the
1 level will be printed, and the reset of all the levels. and the
sales assistants will also be removed.
- Pressing the X key (NO), a clearance to zero list will be
printed. The sales assistants will also be removed.
6.2. DELETING LEVELS [ 9 2 ]
The scale has 3 independent counters of totals called LEVELS 1,2
and 3
The deletion of a counter total is accumulated in the total of the
accumulator of the level immediately above it.
For example, the sales of a day are accumulated in level 1. At the
end of the day, they are deleted and accumulated in level 2. This
level accumulates weekly sales, and, consequently, these sales are
not deleted until the end of the week. When deleted, they are
accumulated in level 3, the monthly sales. When level 3 is deleted,
whatever has been accumulated will disappear from the scale.
To delete the contents of one of these accumulators:
1. Access to the menu pressing MENU during 2 seconds.
2. Press the 9 2 keys
3. Press ∗
∗∗
∗.
4. Press the key of the level you wish to delete using the direct
keys1, 2 and 3 respectively for levels 1,2 and 3.
5. Press the ∗
∗∗
∗ key 4 times.
6. The scale gives 2 options: Press the ∗
∗∗
∗ key (YES), or press the
X key (NO),
- Pressing the ∗
∗∗
∗ key (YES), a clearance to zero list will be
printed. The sales assistants will also be removed.
- Pressing the X key (NO),it is printed a list with the
accumulated of this level, but in this case won’t be a reset
of the level and the vendors won’t be removed.