DIEBOLD NIXDORF D2156 - Optional Peripherals Installation; Waiter Lock Module Installation Guide

10
10 Peripherals (optional)
10.1
10.1 Waiter Lock
The Waiter Lock module is used for system access control.
The operation of the system is very simple, the key is placed onto the magnetic probe (see figure). The
key is held magnetically to the probe and transmits the data by an electrical USB interface.
The readout of the data may be integrated easily in a software application.
NOTE
For guide on software application programming, please refer to the system MSR/Waiter
Lock Programming Manual.
10.1.1
10.1.1 Installation
Figure10-1: Waiter Lock kit
1. The Waiter Lock kit as seen. Containing the
Waiter Lock module and two M3x4 screws.
Confidential External
Copyright © 2023, Diebold Nixdorf
01750368517 B
10-1