Peripherals (optional)
10.5.1
10.5.1 Cleaning Instruction
Fingerprint Readers can be cleaned using the same Optical Cleaning Products used to clean eyeglasses
or cell phone glass surfaces. These Optical Cleaning Products include lens tissues, microfiber cloths and
cleaning solutions.
Use normal adhesive cellophane tape to pick the dust particles by lightly pasting it on the window and
then peeling slowly until the window is cleared of all noticeable particles.
If user wants to disinfect the windows, they may use Ethanol or Isopropanol in a concentration of up to
70%. Apply the liquid to a soft lint-free material (as used to clean eyeglasses or camera lenses) or to a
cotton swab and gently wipe the capture area.
If necessary, gently dab the fingerprint sensor (do not wipe) with a soft cloth (not paper) dampened with
a mild ammonia-based glass cleaner to remove any milky haze.
Confidential External
Copyright © 2023, Diebold Nixdorf
01750368517 B
10-18
To Next Page
