16
MOVING AND STORAGE INSTRUCTIONS14.
Store the charger unplugged, in an upright condition. The AC 14.1
cord will still conduct electricity until it is unplugged from
the outlet.
Store inside, in a dry, cool place.14.2
Do not store the clips on or around metal, clipped together or 14.3
clipped to cables.
If the charger is moved around the shop or transported to 14.4
another location, take care to avoid/prevent damage to the
cords, clips and charger. Failure to do so could result in personal
injury or property damage.
TROUBLESHOOTING15.
PROBLEM POSSIBLE CAUSE
REASON/
SOLUTION
Charger will not turn
on when properly
connected, and no
LEDs are lit.
AC outlet is dead.
Poor electrical
connection.
Check for an open
fuse or circuit breaker
supplying the AC
outlet.
Check the power cord
and extension cord for
a loose tting plug.
CHECK BATTERY
(red) LED is lit.
Reverse connections
at battery.
Battery voltage is too
low.
Unplug the charger
and correct the lead
connections.
This charger has
an automatic start
feature. If the battery
voltage is under 0.2
Volts, the charger will
not detect it and will
not start the charging
process. Have the
battery checked/
replaced.
To Next Page
Loading...
