Diezel VHX - FX Editing and Parameter Adjustment; Available Effects and Parameters

10
VHX DOS 1.71 OWNER’S MANUAL. © 2020 Diezel GmbH. All rights reserved.
d
FX EDIT
FX Edit screen let you edit selected effect parameters, by rotating the relative encoder. Push the BACK encoder to return to FX SELECTION Screen.
PUSH the EFFECT NAME encoder to TOGGLE BYPASS. Some parameters (i.e. DELAY TIME, PITCH) do have a FINE and COARSE mode. Push the
relative parameter encoder to toggle between the two modes.
FX LIST
Below the effect list and the relative parameters.
CHORUS Speed, Depth, Feedback, Tone, Level.
COMPRESSOR Sustain, Attack, Release, Blend, Level.
DELAY Time (MIDI CC#2), Feedback, Speed, Depth, Damping, Tone, Level, TAP.
EQUALIZER 80 Hz, 240 Hz, 750 Hz, 2.2 KHz, 6.6 KHz, Bandwidth, Level.
FLANGER Speed, Depth, Feedback, Level.
LOOP A / B Mix, Send Level, Return Level.
NOISE GATE Threshold, Attack, Release, Decay.
PHASER Speed, Depth, Feedback, Level.
PITCH SHIFT Mode (QUAD, POLY), Pitch, Mix, Pitch A, Pitch B, Pitch C, Pitch D, Pitch Mix, Level.
REVERB Room, Decay, Damping, Tone, Level.
TREMOLO Speed (MIDI CC#2), Depth, Slope, TAP.