Digi PortServer TS 8 - Configuring a User via Web Interface

Configuring Users
15-3
Configuring a User: Web Interface
Use this section to configure users with from the web interface.
1. Access the web interface by entering the PortServer TS 8/16 IP address in a browser’s URL win-
dow.
2. Log in to the PortServer TS 8/16 as root.
The default password is dbps.
3. Select Configure and then Users from the menu.
4. To add a user, do the following:
a. Choose Add User.
b. Enter a name and then choose Submit
c. Choose the new user from the Name column.
d. Configure the user as required.
e. Choose Submit.
5. To return to the main User menu, choose User from the Menu again.