Configuration Examples
17-1
Chapter 17 Configuration Examples
This chapter provides several simple, but complete, configuration examples. If you find that the
examples implement exactly the features needed for your network, simply copy them, making
appropriate substitutions for site-specific information such as IP addresses. Quite likely, however,
you will be able to use the examples as a starting point only and will need the information provided
in other chapters in this manual and in the Digi One/PortServer TS Command Reference to complete
your configuration.
In This Chapter
This chapter provides the following discussions:
• Terminal Server Configuration Without RealPort . . . . . . . . . . . . . . . . . . . . . . 17-2
• Terminal Server Configuration Using Autoconnection . . . . . . . . . . . . . . . . . . 17-3
• Terminal Server Configuration Using RealPort. . . . . . . . . . . . . . . . . . . . . . . . 17-4
To Next Page
Loading...
