How to fix DigiDesign Recording Equipment if power ring doesn't turn green?
If the power ring doesn't turn from orange to green when you start your computer, ensure that you've reconnected the DigiLink cable to the Primary port on the back of the DigiDesign unit.
General| A/D Resolution | 24-bit |
|---|---|
| Bit Depth | 24-bit |
| Digital Inputs | 8 channels via ADAT |
| Digital Outputs | 8 channels via ADAT |
| Interface | FireWire |
| Digital I/O | ADAT |
| Software Compatibility | Pro Tools |
Essential safety precautions for operating electronic equipment.
Warning regarding air flow and cooling for Pro Tools HD audio interfaces.
Information on Pro Tools|HD system requirements and compatibility.
Describes the power button and its status LED ring.
Describes the eight balanced, 1/4-inch TRS analog input connectors.
Describes the eight balanced/unbalanced, 1/4-inch TRS analog output connectors.
Details the stereo, 24-bit AES/EBU digital input and output connectors.
Step-by-step instructions for safely removing an I/O card from the 96 I/O.
Step-by-step instructions for safely installing a new I/O card into the 96 I/O.
To Next Page
