Digisol DG-GS4628E2 - Installation Preparation; Verify the Package Contents; Required Tools and Materials; Installation Guide

DG-GS4628E2 / DG-GS4628HPE-P Installation Guide
14
seek help from the Medical Emergency using various ways.
2.2 Installation Preparation
2.2.1 Verify the Package Contents
First, open the package, please check the contents of the switch container and
accessory kit. (If you are concerned that any item is missing or an incorrect item has been
supplied, please contact your dealer as soon as possible.)
2.2.2 Required Tools and Materials
The required tools and utilities are shown below:

Cross screwdrivers

Flat-blade screwdriver

ESD wrist strap

Antistatic uniform
Caution!
Users should prepare the required tools by themselves.
2.3 Installation Guide
2.3.1 Installing the Switch
Please mount the switch as below:
1. Attach the 2 brackets on the switch with screws provided in the accessory kit.