Need help?Do you have a question about the Digisol DG-GS1528HP and is the answer not in the manual?
General| Ports | 28 |
|---|---|
| Primary Port Type | Gigabit Ethernet |
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Dimensions (W x D x H) | 440 x 44 mm |
| Operating Temperature | 0°C |
| Power Supply | 100~240V AC, 50/60Hz Internal Power Supply |
Explains how to properly connect the switch to a power source.
Guides on how to connect the switch to a network.
Outlines the procedure to access the switch's configuration interface.
Details the process of logging into the switch's management interface.
Configures network interface settings and connectivity.
Allows configuration of the switch's IP address, subnet, and gateway.
Configures settings for switch port related features.
Allows configuration of individual port settings like speed, duplex, and state.
Configures Power over Ethernet (PoE) settings.
Configures global PoE settings and schedules.
Configures Virtual Local Area Network (VLAN) settings.
Manages VLAN configurations.
Allows creation and management of VLANs.
Configures port membership in VLANs.
Ensures a loop-free topology using Spanning Tree Protocol.
Configures global Spanning Tree Protocol (STP) properties.
Configures STP settings for individual ports.
Configures switch security features.
Configures RADIUS server settings for authentication.
Configures access settings for switch management.
Configures management service access options (Telnet, SSH, HTTP, HTTPS, SNMP).
Configures management access control lists.
Configures management access control entries.
Manages authentication settings.
Configures global authentication settings and port modes.
Configures port-specific authentication settings.
Configures port security settings to limit MAC addresses.
Configures storm control to mitigate network broadcast storms.
Configures Denial of Service (DoS) attack protection.
Configures DoS protection features.
Configures DHCP snooping functionality.
Configures global and per-interface DHCP snooping.
Configures IP Source Guard settings.
Configures IP Source Guard settings for ports.
Manages IP source guard entries (bindings).
Configures Access Control List (ACL) features.
Manages MAC Access Control Lists (ACLs).
Manages MAC ACE rules within ACLs.
Manages IPv4 Access Control Lists (ACLs).
Manages IPv4 ACE rules within ACLs.
Binds ACL rules to interfaces.
Configures Quality of Service (QoS) settings.
Configures switch management features.
Manages user accounts and privilege levels for switch access.
To Next Page
