DG-GS1528HP User Manual
Management service admin state.
•
Telnet: Connect CLI through telnet.
•
SSH: Connect CLI through SSH.
•
HTTP: Connect WEBUI through HTTP.
•
HTTPS: Connect WEBUI through HTTPS.
•
SNMP: Manage switch trough SNMP.
Set session timeout minutes for user access to user
interface. 0 minutes means never timeout.
Retry count is the number which CLI password input error
tolerance count. After input error password exceeds this
count, the CLI will freeze after silent time.
After input error password exceeds password retry count,
the CLI will freeze after silent time.
4.10.2.2. Management ACL
To view the Management ACL menu, navigate to Security > Management Access >
Management ACL.
Figure 92 - Security > Management Access > Management ACL
To Next Page
Loading...
Need help?
General
