DG-GS1528HP User Manual
addresses which users define are acceptable. Enter the
source MAC address and mask to which will be matched.
Select the type for Destination MAC address.
•
Any: All destination addresses are acceptable.
•
User Defined: Only a destination address or a range of
destination addresses which users define are acceptable.
Enter the destination MAC address and mask to which will
be matched.
Select the type for Ethernet frame type.
•
Any: All Ethernet frame type is acceptable.
•
User Defined: Only an Ethernet frame type which users
define is acceptable. Enter the Ethernet frame type value
to which will be matched.
Select the type for VLAN ID.
•
Any: All VLAN ID is acceptable.
•
User Defined: Only a VLAN ID which users define is
acceptable. Enter the VLAN ID to which will be matched.
Select the type for 802.1p value.
•
Any: All 802.1p value is acceptable.
•
User Defined: Only an 802.1p value or a range of 802.1p
value which users define is acceptable. Enter the 802.1p
value and mask to which will be matched.
4.11.3. IPv4 ACL
This page allow user to add or delete IPv4 ACL rule. A rule cannot be deleted if
under binding.
To view the IPv4 ACL menu, navigate to ACL > IPv4 ACL.
To Next Page
Loading...
Need help?
General
