DIGITAL DELAY Mega 475 - Line Lock Button Settings

- 54 -
Line Lock Button Settings
When in Bracket Mode
Any P.B. Mode
The first function for the Line Lock button is to
activate the Line Lock solenoid(s) for a burn-out. This also
arms the Replay Tach at the same time.
The second function for Line Lock button is Tap Up,
allowing time to be added to the first delay started. The Tap
Up feature is explained on page 27.
There is no third function for the Line Lock button in
Bracket Mode.
When in Pro Mode
Any P.B. Mode
The first function for the Line Lock button is to
activate the Line Lock solenoid(s) for a burn-out. This also
arms the Replay Tach at the same time.
There is no second or third function for the Line
Lock button in Pro Mode.