Need help?Do you have a question about the Digital Networks DECserver 716 and is the answer not in the manual?
General| Category | Terminal Server |
|---|---|
| Manufacturer | Digital Networks |
| Model | DECserver 716 |
| Number of ports | 16 |
| Port type | RS-232 |
| Form Factor | Rack-mountable |
| Protocols | LAT, TCP/IP |
| Network Interface | Ethernet |
Details the components and LEDs on the front panel of the DECserver.
Details the back panel components of the DECserver, such as fans and power connectors.
Step-by-step guide to attaching rack-mounting brackets to the DECserver using a kit.
Step-by-step guide for inserting the Flash RAM card into the DECserver slot.
Step-by-step guide for removing the Flash RAM card from the DECserver.
Describes compatible cable connections and wiring diagrams for DECserver Ethernet and serial ports.
Details maximum communication distances for Ethernet and maximum cable lengths for data rates.
Instructions for connecting the console cable to the DECserver, including the 8-Pin MJ console cable.
Instructions for connecting the 8-Pin MJ cable to DECserver serial ports.
Instructions for connecting the 10BASE-T (UTP) cable to the DECserver's 10BASE-T port.
Guidance on diagnosing DECserver problems using seven-segment display, System OK LED, and console messages.
Troubleshooting for no power: seven-segment display and System OK LED are off.
Troubleshooting DRAM failure indicated by System OK LED off and specific seven-segment display codes.
Troubleshooting for general hardware errors indicated by System OK LED off and seven-segment display flashing.
Troubleshooting nonfatal self-test problems indicated by a flashing System OK LED and console messages.
Troubleshooting downline loading problems indicated by a '3' on the seven-segment display.
To Next Page
