Digital Projection E-Vision 6500 Series - Selecting Parameters

Digital Projection E-Vision 6500 Series Using The Menus Operating Guide
Page 30
Rev D July 2014
Selecting parameters
Most parameters are changed by selecting
from a list:
• Select from the list using
and .
• The change will be made immediately.
Notes
Some menu options and controls
may not be available due to settings
in other menus. These will be
shaded grey on the actual menu.
Some parameters are changed by selecting
from a pop-up menu.
• Press ENTER to open the pop-up menu.
• The item that is currently selected is
highlighted.
• Select from the list using
and .
• The change will be made when you
press ENTER to conrm the selection.