Digital Projection E-Vision 6500 Series - Advance Setting; Communication Speed

Digital Projection E-Vision 6500 Series A Tour Of The Menus Operating Guide
Page 42
Rev D July 2014
Advance Setting
Keystone
• Set the slider to correct for any vertical keystone distortion.
Image Resizing
• Set this to correct for any image distortion when keystone correction is being used.
Filter Message
• Select a Filter Message time interval from the list, or select Off.
LAN/RS232C
• Select from LAN or RS232C as the remote connection used for external control of the projector.
Communication Speed
• Sets the Serial Port (RS232) baud rate. Longer cable connections may require lower speeds.
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
Installation Menu
Advance Setting submenu
Only one remote connection can be
used at any one time.
MENU = END | SEL/ADJ. | SEL.
SetupVideo
Installation
SignalPicture
Keystone
Image Resizing
Filter Message
LAN/RS232C
Network
Advance Setting
LAN
0
0
10000H
Communication Speed
9,600
Installation menu continued