Digital Projection E-Vision 6500 Series - In this Guide; Digital Projection E-Vision 6500 Seriesin this GUIDE; Introduction

Digital Projection E-Vision 6500 Series Introduction Remote Communications Guide
51
Rev D July 2014
Introduction
The projector can be controlled by using an external control system in three different ways:
• All of the projector’s features can be controlled via a serial connection, using the control strings described in this guide.
• All of the projector’s features can be controlled via a LAN connection, using the industry standard PJLInk commands.
For more information about this, see PJLink later in this guide.
• A number of basic picture and input settings can be controlled directly using the embedded LAN Control utility.
For more information about this, see LAN Control Utility later in this guide.
Notes
Details of how to connect to
the projector using the LAN or
RS232 input, can be found in the
Connections Guide.