: Select the camera settings or enter to submenu.
To use UTC in the Live mode:
1. Select the single channel which adjusts the camera setup and changes the PTZ control
mode.
2. Click the right button of the mouse on the Live screen and select PTZ for activating
UTC.
3. Click the CONTROL button and open the control menu and then activate the OSD menu
and setup the camera.
4.2.5. Transaction Verification Settings
TRANSACTION VERIFICATION equipment can be connected to the DVR through an RS-232
port or LAN.
No.
Port Number of the Serial connection. For example: NO1 = COM1, NO4 = COM4.
Cam
Assign a camera to the transaction verification device.
Type
Connection type between DVR and transaction verification device.
To Next Page
Loading...
