4.5.3. Notification
Remote Notify
The system can send an alarm message to a remote viewing software by using the IP address
of the hosting PC.
Select REMOTE NOTIFY to use this function and set the IP
address & events.
• IP Address: Input the IP address of the PC hosting
the remove viewing software that will be receiving
the event notifications.
• Port: (Default is 8003) Input Port number which is
set at the remote PC.
• Event: Select which events to be notified about. If
“ALL” is selected, all events will trigger a remote
notification.
Email Notify
The system can send a notification to an email address.
Select EMAIL NOTIFY to use this function and set your email
address and events
• Email: Input the email address which will receive the
event notifications.
• Event: Select which events will trigger notifications. If
“ALL” is selected, all of the events will trigger a
notification.
• SNAPSHOT NOTIFY SETUP: Select camera channels to include live snapshot images of
selected channels to the email address. Set the
dwell time between camera image captures.
• VIDEO CLIP ATTACHMENT: Select to include a
short video clip with the email notification
when either a sensor or motion detection
(CAMERA ALARM) has triggered the
notification. The event type must also be
selected.
Notification Settings
• OUTGOING MAIL SMTP SERVER: Input the SMTP server that is being used to send the
To Next Page
Loading...
