DIGITALas DD-5100 - Page 34

DD-5100
an example of full reset:
[8.F.rESEt] > > [2.ALL] > > [rSt?] > > [donE]
After this step the system restarts automatically and factory settings come into effect.
NOTE. Restoring of factory settings is valid for only ones, defined in table 4.
Table 4: Values of factory settings
Title Description Factory value
[3.SEttinGS]
[1.Lc.dELAY]
Unlock delay time (1 – 100) sec 5 sec
[2.Lc.tYPE]
Lock type (electromagnetic lock / electric bolt) NC (electromagnetic lock)
[3.Acc.tYPE]
Access control type code / TM key / RFID identificator
[4.CS.no]
Number of call signals 5
[4.voL]
[1.Indoor]
Indoor volume level (1 – 10) 6
[2.outdoor]
Outdoor volume level (1 – 10) 6
[3.Sound]
System signals sound level (1 – 10) 6
[6.AddrESSinG]
Type of addressing (regular/shifted/hotel) Regular
[7.nEt]
Network configuration (NET1/NET2/NET3) Network disabled
32
ENTER
ENTER ENTER