DigiTech Bass Whammy - Effect On;Off Footswitch; Power Input; Output Jack; Instrument Input

7. Status LED
This LED lights to indicate the eect is on. When the eect is bypassed, this LED will be
o.
8. Eect On/O Footswitch
This switch turns the Whammy, Harmony, or Detune eect on and o.
9. Power Input
Connect the power supply to this jack. Do not use any power supply other than the
included power supply.
10. Output Jack
Connect this jack to another pedal input or the input of an amplier.
11. Instrument Input
Connect your instrument to this jack.
12. MIDI Input
Connect an external MIDI device to this jack for the purpose of controlling the Bass
Whammy remotely.