13
Stereo Operation
For stereo operation connect the bass to the Input of the BP90. Connect one cable to the
BP90’s Left (Mono) output, and another cable to the BP90’s Right output. Connect one cable
to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set
the pan controls of the mixer channels hard left and right in order to retain stereo separation. If
connecting to a mixer, set the Amp/Mixer switch to Mixer. If connecting to two amplifiers, set
the Amp/Mixer switch to Amp.
Stereo Amp Setup
Bass Amp Input/Effect Returns
Outputs Input
Amp/Mixer
switch set to
Amp.
DRUMS
DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY
EFFECTS LIBRARY
EFFECTS LEVEL
EFFECTS LEVEL
MASTER LEVEL
MASTER LEVEL
PRESET LEVEL
PRESET LEVEL
FRETLESS / WAH
FRETLESS / WAH
COMPRESSOR
COMPRESSOR
COMPRESSOR
AMP / DISTORTION
AMP / DISTORTION
EQUALIZER
EQUALIZER
NOISE GATE
NOISE GATE
CHORUS/FX
CHORUS/FX
DELAY
DELAY
REVERB
REVERB
EXPRESSION
EXPRESSION
PATTERN
PATTERN
TEMPO
TEMPO
LEVEL
LEVEL
LEVEL
TONE LIBRARY
TONE LIBRARY
BASS
BASS
DRUMS
DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY
EFFECTS LIBRARY
EFFECTS LEVEL
EFFECTS LEVEL
MASTER LEVEL
MASTER LEVEL
PRESET LEVEL
PRESET LEVEL
FRETLESS / WAH
FRETLESS / WAH
COMPRESSOR
COMPRESSOR
COMPRESSOR
AMP / DISTORTION
AMP / DISTORTION
EQUALIZER
EQUALIZER
NOISE GATE
NOISE GATE
CHORUS/FX
CHORUS/FX
DELAY
DELAY
REVERB
REVERB
EXPRESSION
EXPRESSION
PATTERN
PATTERN
TEMPO
TEMPO
LEVEL
LEVEL
LEVEL
TONE LIBRARY
TONE LIBRARY
BASS
BASS
NOTE: When using a bass
amp, it may be best to con-
nect the Output of the BP90
to the effect return of the
amplifier.
To Next Page
Need help?
General
