33
Drum Machine
The BP90 features a built-in drum machine, which is enabled by pressing the Drums button.
Select patterns, tempo, and level with the Edit Up/Down buttons. Change their values with the
Value Up/Down buttons. The drum machine has the following parameters
Drum Patterns 1-40
Drum Tempo 1-99 (equivalent of 40 – 240BPM)
Drum Level 0-99
Drum machine settings are globally set and not individually stored with each of the BP90’s user
presets.
Factory Reset
This function resets the BP90 to its original factory settings. This procedure erases all custom
User presets.
ATTENTION:Performingthisfunctionwillerasealluser-programmeddata.Allsuch
datawillbelostforever!BesureyouwanttoerasethememoryandreturntheBP90
to its factory default state before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the BP90.
2. When the display prompts you with FR, release the Store button.
3. Press and hold the Store button for 3 seconds until RS appears in the display and release. The
FactoryResetproceduretakesapproximately10seconds.
4. Once the factory reset has finished you will need to calibrate the Expression Pedal. Follow
steps 2-4 on the next page to complete calibration.
To Next Page
Loading...
Need help?
General
