3
up. The right 6 red LEDs indicate the note is sharp and should be tuned down. The center LED
indicates the note is in tune. The output is muted in Tuner mode; rock the Expression Pedal to
regain volume.
DRUMS
DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY
EFFECTS LIBRARY
EFFECTS LEVEL
EFFECTS LEVEL
MASTER LEVEL
MASTER LEVEL
PRESET LEVEL
PRESET LEVEL
FRETLESS / WAH
FRETLESS / WAH
COMPRESSOR
COMPRESSOR
COMPRESSOR
AMP / DISTORTION
AMP / DISTORTION
EQUALIZER
EQUALIZER
NOISE GATE
NOISE GATE
CHORUS/FX
CHORUS/FX
DELAY
DELAY
REVERB
REVERB
EXPRESSION
EXPRESSION
PATTERN
PATTERN
TEMPO
TEMPO
LEVEL
LEVEL
LEVEL
TONE LIBRARY
TONE LIBRARY
BASS
BASS
Display shows
note played
Right LEDs indicate
note is sharp
Center LED indicates
note is in tune
Left LEDs indicate
note is flat
In Tuner mode, you can change your tuning reference with the Value Up/Down buttons. The
default factory setting is A=440 Hz (displayed as 40). Other tuning references are A=A flat (dis-
played as Ab), A=G (displayed as
), and A=G flat (displayed as b). The display window will briefly
flash the currently selected tuning preference.
Exit Tuner mode by pressing either Footswitch.
To Next Page
Loading...
Need help?
General
