Selecting the Flexible Output Mode
TM
1. Power up the Jimi Hendrix Experience
TM
Pedal.
2. Select Model 7 using the MODEL knob.
3. Press and hold the HEEL SWITCH for five seconds.The
INDICATOR LED begins to flash yellow.
4. Release the HEEL SWITCH.
5.Turn the MODEL knob to Model 6 to select STEREO AMP mode, or
leave the MODEL knob at Model 7 to select STEREO MIXER mode.
6. Press the TOE SWITCH to exit Flexible Ouput Mode Setup; the
INDICATOR LED turns off.
NOTE: Keeping the MODEL knob set to Model 7 will leave the pedal in
STEREO MIXER mode (Flexible Output Mode 2). Selecting any other
Models besides 6 or 7 will prevent you from exiting Flexible Output
Mode Setup.
To Next Page
Loading...
