DigiTech RP200A - Getting Started with RP200 Artist; Making Connections for Sound

Getting Started
Making Connections
There are several different connection options available with the RP200 Artist.Before connecting
the RP200 Artist, make sure that the power to your amplifier and the RP200 Artist is turned off.
There is no power switch on the RP200 Artist.To turn the RP200 Artist on or off, simply
connect or disconnect the included PS0913B power supply from the Power Jack to an AC
outlet.
Mono Operation
Connect your guitar to the Input of the RP200 Artist.Connect a single mono instrument cable
from the Stereo Output of the RP200 Artist to the instrument input or effect return on your
amplifier, or to the line input of a power amp.
6