Storing/Copying/Naming a Preset
Once the Preset has been modified to your liking,you may store your settings to any of the 40
User Preset locations (Presets 1-40). The following steps outline the procedure for storing
changes to a Preset or copying a Preset to a different location:
1.Press the Store button once.The Store button LED will blink and the first character in the
Display will Flash indicating that you can now name your custom creation.
2.Use the Parameter 1 Knob to select the alpha-numeric character and the Parameter 2
Knob to select the next character location
3.Once the desired name is shown in the display,press the Store button again to enter the
second stage of the storing process.
4.Select the User Preset location your new sound will reside in using the up and down
Footswitches.The display will alternate between showing the Preset name and user preset
number about to be overwritten.
13
To Next Page
Loading...
Need help?
General
