DigiTech TONE DRIVER User Manual

The Tone Driver Distortion is the world’s most advanced overdrive
pedal. DigiTech’s exclusive AudioDNA™ technology is what makes the
Tone Driver more than your standard overdrive stompbox. Rather than
working from a single overdrive circuit,the Tone Driver features a
Morph knob which blends between three totally distinct overdrive types.
You now get a wide variety of different overdrive sounds that can be
dialed in quickly and easily.
1. Level Knob
Controls the effect’s output level. Turn this knob clockwise to increase
the output level,and counter-clockwise to decrease output level.
2.Tone Knob
Controls the boost or cut of high frequencies. Turn this knob clockwise
to increase the high frequency content, and counter-clockwise to
decrease the high frequency content.
3.AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage.

DigiTech TONE DRIVER Specifications

Power

power_supply	9V Alkaline Dry Battery
power_consumption	4.8 Watts
optional_power_supply	PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 60Hz), PS200R - 240 (240V ~ 60Hz)

Impedance

input_impedance	280 kOhms
output_impedance	100 Ohms

Weight and Dimensions

weight	1.38 lbs
dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)