DigiTech TRIO Band Creator - USING AN FS3 X FOOTSWITCH; Using the FS3 X Footswitch with TRIO

13
USING AN FS3X FOOTSWITCH
An optional DigiTech FS3X Footswitch can be connected to the CONTROL IN jack for additional hands-free
control. A TRS (tip-ring-sleeve) 1/4” cable must be used when connecting the FS3X to the TRIO. The footswitches
on the FS3X will function as shown in the below illustration.
TRS Cable
Enables the ‘Learning’ state for
learning a new PART and controls
play/stop for an existing PART.
Advances to the
next STYLE.
Press and hold
to decrement.
Advances to the
next PART.