User Manual
4-4-2. Factory Default
Function name:
Factory Default
Function description:
Factory Default provides the function to retrieve default settings and replace
current configuration. Except the IP address setting, all settings will be
restored to the factory default values when “Factory Default” function is
performed. If you want to restore all configurations including the IP address
setting to the factory default, please press the “RESET” button on the front
panel.
Note for “RESET” button:
You must press the “RESET” button over 3 seconds to restore the factory
default setting.
Fig. 4-35
Publication date: Septembery, 2007
Revision A3
96
To Next Page
Loading...
