User Manual
Publication date:September, 2007
Revision A3
77
4-2-12 Filter
Function name:
Filter Configuration
Function description:
This function lets administrators easily set management source IP addresses
to the ports on the switch. After completing the settings, please press <Apply>
button to make this function take effect.
Parameter description:
Source IP Filter:
Mode:
There are three types of mode in this drop-down menu. Default is
disabled.
Disabled:
Allow all IP Address login to this switch and manage it.
Static:
Just allow the IP Address which set by administrator to login to this
switch and manage it..
DHCP:
Allow the IP Address get from DHCP server can login to this switch
and manage it.
IP Address:
Setting up the IP Address, it can be one IP Address or a LAN.
IP Mask:
Setting up the IP Subnet Mask related with the IP Address.
DHCP Server Allowed:
Just tick the check box (
;) under the port x to allow the DHCP Server
on this port and valid port is Port 1~16.
Default: enable
To Next Page
Loading...
