Digitus DN-13006-1 User Manual

31
System Status
1. Click Status, it then appears the sub-menu.
2. Click System, it then as shown in the following picture.
Print Server Name: This option allows you to view device name of the print server.
To correct the print server’s device name.
System Contact: This option allows you to view contact name of the print server.
To check the print server’s contact name who in charge of this device.
System Location: This option allows you to view Location name of the print server.
To confirm the print server’s location name where the print server is
located in the office’s LAN.
System Up Time: This option allows you to view uptime of the print server.
When you start the print server, it will compute the print server from
start time to power off time.

Digitus DN-13006-1 Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Web-based management	Yes
Supported network protocols	TCP/IP
USB connector type	USB Type-A
Serial ports quantity	0
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Internal	No
Product color	White
Country of origin	Taiwan
AC input voltage	230 V
AC input frequency	50 Hz
Package type	Box